The radio rack room, reimagined

Say goodbye to capex on instantly outdated boxes, and say hello to Ramus Cloud; Always on, always updated cloud-based toolbox for today's broadcast landscape.

What stays on site: your console, your automation, your exciter and transmitter, and one small Ramus Cloud box at each end.

Seventeen rack units, studio and transmitter site together.
Rack view
  • STL codec, replaced by studioEDGE
  • Audio router, replaced by Routing table
  • Closure extender, replaced by Routing table
  • Silence sensor, replaced by Alerts and failover
  • Backup audio player, replaced by Alerts and failover
  • FM processor, replaced by Processor
  • RDS encoder, replaced by Processor
  • Diversity delay, replaced by Processor
  • Streaming encoder, replaced by Encoder
  • Modulation monitor*, replaced by FM MPX Analyzer*
  • Phone hybrid, Coming
  • Remote broadcast codec, Coming
  • Logger, Coming
Blank panelstudioEDGEtxEDGE
RamusCloud
  • studioEDGEOpus over the internet, as the main path or a backup
  • Routing tableA crosspoint grid for audio and contact closures
  • Alerts and failoverSilence, low level, clipping, and a backup for any route
  • ProcessorFM and DAB legs, RDS, diversity delay
  • EncoderIcecast push and HLS, with now-playing
  • FM MPX Analyzer*The off-air multiplex, measured by txEDGE
  • Phone hybridComing
  • Remote broadcast appComing
  • Logger and skimmerComing
*

The FM MPX Analyzer is a monitoring aid. It is not a calibrated modulation monitor and must not be used as a compliance measurement.

The FM and DAB processor, in the cloud.

The processor runs as its own service in Ramus Cloud, with an FM leg, a DAB leg and an RDS encoder. Set the diversity delay between the legs in the console, up to 12 seconds either way.

The Ramus Cloud console's processor page: the meter bridge, the CMPX transport status, presets and the wideband AGC controls
The processor in the Ramus Cloud console.

The off-air multiplex, available anywhere.*

txEDGE listens to the station off air. The FM MPX Analyzer puts the processor's composite and the off-air multiplex on one spectrum, so you can see what you are transmitting, not just what you're sending.

The Ramus Cloud console's FM baseband spectrum from 0 to 60 kHz: the L+R audio, the 19 kHz pilot, the L minus R stereo subcarrier and the RDS subcarrier, with the processor composite and the off-air multiplex overlaid, plus a peak-hold trace
The FM MPX Analyzer in the Ramus Cloud console.

Two boxes on site

studioEDGE: a black finned enclosure printed with the studioEDGE name, with USB and Ethernet ports
At the studio, between your plant and Ramus Cloud. Illustrative.

studioEDGE

  • AES67 in and out
  • GPIO
  • Optional USB audio interface at 48 kHz (customer provided)
txEDGE: a grey enclosure with a smoked top printed with the txEDGE name, two BNC connectors on the front
At the transmitter site, feeding your exciter. Illustrative.

txEDGE

  • CMPX receiver
  • Analog composite output included
  • Digital MPX out via optional user-supplied hardware
  • Off-air monitoring

ramus

Latin, a branch.

Ramus is a Latin word meaning “branch”, used primarily in anatomy to describe a projecting part, elongated process, or branching structure.

A signal is published once and branches to everything that needs it.

Start with the box that is due for replacement.

Sign up in the console, add a box, and switch on the part you need first.